The IPV3 is an insanely powerful box mod at 150 Watts, manufactured by Pioneer4You. Featuring dual 18650 battery capability, OLED Display, SX 330 V3S Chipset, and upgradeable firmware! You can precisely dial in the wattage to your atomizer from 7 watts all the way to 150 watts and it supports atomizers from 0.15 Ohms to 2.00 Ohms. When fully sealed, this mod is also water resistant. As upgrades are made to the technology, you can upgrade this mod with the included USB cable (which is only for upgrades, not for charging). The batteries should be removed from the mod for charging, the USB input is not for charging (it would take forever anyhow to charge 2 x 18650 cells via USB). We stock these mods in black or silver.
- 150 watt SX330 V3S module chip
- Pioneer4You recommends using only 30 amp 18650 batteries for this mod
- Water resistant mod
- DNA board layout
- The firmware is upgradeable via USB port, up to 180 watts
- Beautiful, precision-made tactile buttons
- 7-150 watt range
- 1.0-7.0 volt range
- Output current of 40 amps
- Handles down to .1 ohm resistance – no need for a mechanical mod anymore!
- Links to Yihi SX GUI desktop software for firmware updates/upgrades
- Handles up to 3.0 ohm resistance
- Auto ohm resistance meter finds ideal voltage for tank/dripper
- Wattage regulated via two buttons, -/+
- Proprietary/oval interface charging port – charger will be sold separately
- USB port for firmware updates
- LED screen with white OLED .69″ display
- Battery life readout in realtime
- Touch sensor fire button
- Locking mechanism to prevent misfire
- Chip runs cool to avoid heat and temperature sensor malfunction
- Adjustable 510 pin to fit all 510 atomizers
- Utilizes two 18650 batteries (sold separately)
- Aluminum body
- Dimensions 4-1/8" x 2-1/4" x 15/16"
We recommend at least 30A minimum 18650 cells for use with this mod.
What's in the box?
- 1 x iPV3 150 Watt Box Mod by Pioneer4You
- 1 x USB Cable for Upgrading
- 1 x Hex Screwdriver
- 2 x Spare Screws